Includes

Jammin X1CR Factory Team rolling chassis with shocks, lexan body,
tires, wheels, foam inserts, 48T steel spur gear, aluminum engine
mount, medium fuel tubing, foam air filter, instruction manual
molded neon yellow rear wing, stickers, window mask sheet

Requires

Radio: 2-Channel with 2 standard size Servos
(high torque servo for steering recommended but not required)
Radio Batteries: (8) AA size
Engine: .21 w/rear exhaust and pilot shaft
Tuned Pipe and Manifold for Rear Exhaust
Glow Starter: 1.2 volt
Paint: Polycarbonate for body
Misc. Items: Fuel bottle

Features

Chassis: 0.12" (3mm) CNC countersunk aluminum with 0.20" (5mm) thick
shock towers
Drive: Four wheel, shaft driven
Fuel Tank: 4.2oz (125cc) w/flip top cap
Clutch: Aluminum 3-shoe clutch
Transmission: Single Speed
Ball Bearings: Full set
Shocks: Four Pro threaded with 13mm diameter hard anodized aluminum
bodies
Main Gear: 48T steel
Gearbox: Sealed both front and rear
Differentials: Planetary geared front and rear
Brake: Fiberglass disk
Body: Clear buggy
Tires: Jammin' Ripper square spike tires with foam inserts 2.6"
(66mm) inner diameter, 1.6" (40mm) wide
Wheels: 2.6" (66mm) diameter plastic dish wheels, neon yellow in
color
Bumpers: Front high strength nylon
Caster: Adjustable, caster/toe-in refers to the angle of the front
suspension when viewed from the side of the car in relation to the
chassis
Camber: Adjustable, camber refers to the angle of the tops of the
tires from vertical when viewed from front or behind vehicle
Steering: Bell crank type w/servo saver